Garage Roof Siphon Drainage System（2）

Garage siphon drainage system is to set up a drainage system on the roof of the garage to replace the original ceramic and plastic drainage to achieve better drainage effect.The construction period of the system is short, the cost is saved and the drainage effect is good. It's a much easier system to roll out.Due to precipitation, water sometimes forms on the roof. When the water rises to a certain height and submerges the root system of the plant, it may cause root rot.Therefore, it is very necessary to set the drainage layer. However, traditional blind drainage has its limitations. Local drainage is not smooth, easy to cause water. If the water can not be discharged for a long time, it is easy to cause plants to rot. If the waterproof layer is in a flooded environment for a long time, it is easy to cause local waterproof layer leakage, which will not only waste a lot of manpower, material resources and financial resources, but also greatly reduce the service life of the entire building.

A good protective drainage system has an important guarantee for the normal use and service life of the building. The garage siphon drainage system is a system that integrates the functions of protection, drainage and collection. The main purpose is to discharge the excess water in the planting soil, protect the normal growth of plant roots, and transfer a protective layer to the waterproof layer. Tailoring not only saves time and effort, but also saves energy, saves investment and reduces the load of buildings. The specific materials and installation steps are as follows:

The garage roof siphon drainage system is much simpler than the traditional drainage structure, the garage roof siphon drainage system is mainly composed of siphon drainage plate (also known as the covering cloth drainage plate or polymer protection drainage shaped piece), siphon drainage tank, geotextiles, sticky bulks. According to the siphon phenomenon, the water of the garage roof is discharged in time, which is conducive to the surface water discharge.

Garage top siphon drainage system installation steps:

1. Clean the base and plan the elastic line.

When installing a garage roof siphon drainage system, you must first find a place to install it. According to the specific site situation, find the plane, clean up the surrounding environment, draw the overall drainage direction, and determine the elastic line according to the location.

2. Secure the drain pipe.

 After the elastic line is determined, the next step is to lay the drainage pipe required for the roof siphon drainage system according to the elastic line, and lay the fixed siphon drainage pipe with double-sided adhesive.

3. Lay and install special drainage plate.

It is also necessary to install and lay drainage shaped pieces along the drain pipe and fix them with double-sided tape.

4. Install a snorkel observation tube.

The siphon drainage system at the top of the garage also needs to install a ventilation observation pipe, so that the rainwater collected by the siphon drainage ditch can enter the rainwater collection pipe network smoothly.

5. Seal the drain sink with geotextile.

When laying the siphon drain tank, it is also necessary to seal the drain tank with geotextiles, and the special glue is used between the two geotextiles.

6. Install siphon reducer settling well.

The siphon drainage system outlet at the top of the garage, through the change of pipe diameter, the water of the siphon drainage tank is continuously sucked into the observation well to achieve organized drainage.

7. Backfill the garage roof.

 The garage roof should be backfilled in time, and the soil should be filled in time to avoid damage to the anti-seepage and drainage shaped pieces and geotextiles. Should be filled along with the shop.

8. Install the water storage module.

Install as required.