High Quality Biaxial Plastic Geogrid
Bidirectional plastic geogrid product introduction:
biaxial geogrid is made of polymer pp or pe by extrusion. After the plate punching process, it is then stretched laterally and longitudinally.
It has the advantages of good flexibility, high strength, dimensional stability, water permeability, easy construction and so on.
Support bulk ordering with favorable prices.
Support ODM/OEM.
The factory has stock and fast delivery.
Delivery Time: 10-20 working days
Minimum Order Quantity: 300 square meters
Payment Term: 30% T/T Deposit, 70% T/T Before Shipping
Why do all manufacturers not use polyethylene (PE) as raw material production? There are several reasons why:
(1) Polypropylene has no tensile brittleness, and the creep resistance is not as good as polyethylene, but there is no brittleness problem after stretching, which is determined by the performance of the material itself.
(2) Polypropylene has the highest tensile strength and a larger tensile ratio, relatively speaking, the same tensile strength of the Biaxial stretch plastic geogrid, polypropylene cost is much lower.
(3) Polyethylene has the highest viscosity, difficult production, power consumption is also large, polypropylene is easy to process.
Product features:
Good flexibility, acid and alkali resistance, corrosion resistance, aging resistance, high strength, and has good water permeability, filtration, isolation performance.
The role of bidirectional stretch plastic geogrid：
(1)Increase and enhance the bearing capacity of the road or subgrade, extend the service life of the road or subgrade.
(2)Prevent road or pavement from collapsing or cracking, keep the ground beautiful and tidy.
(3) Construction is convenient, time saving, labor saving, shorten the construction period, reduce maintenance costs, but also greatly reduce the construction cost.
Geogrid laying precautions:
The paving surface of the geograe should be relatively flat, after the paving layer is qualified, in order to prevent longitudinal skew phenomenon, first draw white lines or hanging lines in the paving layer according to the width, you can start paving, and then fix the end of the grille with iron nails (8 nails per meter width, fixed at an even distance).
After fixing the end of the grille, use the paver to slowly pull the grille forward, manually tighten and straighten it every 10 meters long, until one roll of the grille is finished, and then lay the next roll, the operation is the same as before.
Technical Data:
Properties Item | Tensile StrengthkN/m2 | Elongation Rate % | Strength at 2%elongation KN/M | Strength at 5%elongation ≥KN/M | ||||
Longitudinal | Transverse | Longitudinal | Transverse | Longitudinal | Transverse | Longitudinal | Transverse | |
TGSG15-15 | ≥15 | ≥15 | ≤13 | ≤16 | ≥5 | ≥7 | ≤8 | ≤10 |
TGSG20-20 | ≥20 | ≥20 | ≤13 | ≤16 | ≥8 | ≥10 | ≤10 | ≤13 |
TGSG25-25 | ≥25 | ≥25 | ≤13 | ≤16 | ≥8 | ≥11 | ≤11 | ≤13 |
TGSG30-30 | ≥30 | ≥30 | ≤13 | ≤16 | ≥11 | ≥13 | ≤15 | ≤15 |
TGSG35-35 | ≥35 | ≥35 | ≤13 | ≤16 | ≥12 | ≥14 | ≤15 | ≤18 |
TGSG40-40 | ≥40 | ≥40 | ≤13 | ≤16 | ≥13 | ≥15 | ≤16 | ≤20 |
TGSG45-45 | ≥45 | ≥45 | ≤13 | ≤16 | ≥14 | ≥16 | ≤17 | ≤22 |
TGSG50-50 | ≥50 | ≥50 | ≤13 | ≤16 | ≥15 | ≥17 | ≤18 | ≤24 |
Packaging:
Customer's company Logo mark can be added.
Packed in woven bags.
Q&A:
Q: What can you buy from us?
A:Geomembrane Geogrid GeocellGeotextile.
Q: Can l have a sample?
A: Yes. And sample free.
Q: What's the payment terms?
A: T/T or LC. Others could be negotiated
